How to prevent cracking, decrypting and copying, such as one person, one card and one secret, let the elevator access control in the community become the exclusive use for the owners of the community and the relevant authorized users. So what are the hardware components of an anti - copy ladder control device?
It will consist of elevator master control board, floor extension board (more than 16 floors), card reader, card issuer, chassis, power supply, customer card, management computer and software. For example, 485 protocol converters should be equipped with the control board to connect to the computer, such as TCPIP network switch.
What are the hardware components of an anti - copy ladder control device?
Specific requirements are as follows:
1. Anti-duplication elevator control main board: one elevator is equipped with a main board, and one main board controls 16 floors.
2. One elevator floor extension board: 16 floors can be controlled by one extension board, 32 floors can be controlled by combination with the main board, and 64 floors can be controlled by three extension boards.
3. One card reader: the card reader is connected with the main control board to read card information and transmit it to the control board. One elevator board can be equipped with one or two card readers.
4. One card writer: a reader is connected to the USB port of the computer. A project or each management computer is equipped with one card writer
5. User card: the user card must be an MF1 card, one card for each user.
6, 1 computer management: the computer must have USB interface and 232 ports, connect the reader to set user card and controller parameters, a project with a computer.
7. One DC12V 3A power supply: input AC220, output dc123a, one mainboard with one power supply, and expansion board can share power supply.
8. One chassis: one power supply per unit, which can be equipped with elevator main board, extension board and power supply. If there is space behind the buttons of the elevator floor, there is no need to install a chassis.
9, 485 converters 1, 485 converters connect the computer and controller, mainly used to extract controller card records, set controller parameters. A management computer with a converter, if there is no need to swipe the card record may not be equipped with 485 converter.
JLT Sprite replication products include the following:
Anti-duplicate elevator access control: IC card elevator, IC card elevator, elevator access control, elevator controller, elevator IC card access system,
Anti-duplicate elevator card: IC card, ID card, HID card, EM card, CPU card, T5557 card, LEGIC card, magnetic stripe card, ID card, residence card, etc
Anti-duplication elevator control system: elevator control IC card intelligent system, elevator control IC card management system, elevator control IC card control system, elevator control IC card intelligent management system.
Anti-duplicate access control system: elevator IC card swiping system, elevator access control system, elevator control system, elevator management system, elevator IC card, elevator IC card system, etc.
Shenzhen e-spirit technology co., ltd. also has the following products:
Non-contact palm vein recognition access control, face recognition access control, attendance, elevator access control,
Three-roll gate, wing gate, swing gate, intelligent integrated road gate,
Remote automatic identification vehicle automatic management system,
IC card parking management system,IC card access control attendance machine,
IC card split access control system,IC card elevator controller board,
IC card elevator reader,IC card elevator access control, intelligent controller -- call elevator,
Elevator intelligent controller -- floor control type,IC card intercom linkage elevator intelligent management system -- intercom linkage type,
Elevator and building intercom system linkage,IC card elevator intelligent management system - layer control, etc.