Elevator Interphone Manufacturer-Customer Service Telephone
About Smart - Elevator Monitor Manufacturer
Elevator Interview Project Case
Project case
JLT has already had successful cases of elevator wireless intercom, elevator five-party intercom and elevator wireless monitoring in all walks of life;
Elevator Intertalk Solution
Elevator Intertalk Technology Support
Elevator Interview Factory News and Information
Contact elevator intercom manufacturer
Product
Elevator external call card controller — Elevator access control external call controller
Elevator external call card controller

Elevator external call card controller

Embedded installation/plug-in installation


Elevator external call card controller

Elevator external call card controller

Embedded installation/plug-in installation


  • Product details
  • Schematic diagram


JLT-T external call series    

Product name: elevator external call swiping card controller

Installation mode: embedded installation/plug-in installation (factory specified)

Networking mode: non-networking

Control mode: standard switching signal

Shell material: imported high-end aluminum alloy forging (external calling all-in-one machine is optional)

1. The system provides one-way switch output, which can be used to control a single key (external call or internal call);

2. Passive contacts are used to connect the system and elevator, which are completely isolated and will not affect each other;

3. With the use of network, software, data collector and other optional equipment, the blacklist management function can be realized to prevent the card from being lost and illegally broken into after being picked up by illegal users;

4. The call elevator controller records the relevant information (including the user's card number, time of use, elevator code used, etc.) of each successful swipe of the card, which can be read from the controller through the network or collector for statistics, printing, archiving and inquiry;

5. The system is capable of managing 28,000 CARDS, and can store 58,000 elevator use records, 10,000 alarm records, and 3,000 blacklists. The storage records are guaranteed not to be lost within 10 years in the case of power failure.

6, can realize linkage with elevator fire switch. After starting the fire switch, the IC card elevator system power off and does not work, and the elevator returns to its original state (the fire signal provided should be the passive dry contact signal);

7. In special cases, the operator can open the call elevator and control it to ensure emergency treatment.





             

No schematic diagram at present

  • JLT-T external call series    

    Product name: elevator external call swiping card controller

    Installation mode: embedded installation/plug-in installation (factory specified)

    Networking mode: non-networking

    Control mode: standard switching signal

    Shell material: imported high-end aluminum alloy forging (external calling all-in-one machine is optional)

    1. The system provides one-way switch output, which can be used to control a single key (external call or internal call);

    2. Passive contacts are used to connect the system and elevator, which are completely isolated and will not affect each other;

    3. With the use of network, software, data collector and other optional equipment, the blacklist management function can be realized to prevent the card from being lost and illegally broken into after being picked up by illegal users;

    4. The call elevator controller records the relevant information (including the user's card number, time of use, elevator code used, etc.) of each successful swipe of the card, which can be read from the controller through the network or collector for statistics, printing, archiving and inquiry;

    5. The system is capable of managing 28,000 CARDS, and can store 58,000 elevator use records, 10,000 alarm records, and 3,000 blacklists. The storage records are guaranteed not to be lost within 10 years in the case of power failure.

    6, can realize linkage with elevator fire switch. After starting the fire switch, the IC card elevator system power off and does not work, and the elevator returns to its original state (the fire signal provided should be the passive dry contact signal);

    7. In special cases, the operator can open the call elevator and control it to ensure emergency treatment.





                 

  • No schematic diagram at present

Prev:NO Articles

Next:NO Articles

Back
Service Hotline:400 0868 993
Elevator Monitoring Manufacturer - Wechat Public Number

Wechat Public Number

Copyright ? 2008 金沙js333备用地址 All Rights Reserved 粤ICP备14064028号
XML 地图 | Sitemap 地图